Last updated: September 2026
An electrician costs somewhere between about $50 and $130 an hour in the USA, and most single household jobs land between roughly $163 and $538 once labour, parts and the call-out are added together.
The reason that range is so wide has less to do with who is greedy and more to do with licence tier, minimum charges and whether the work needs a permit. This guide separates those layers, gives current published figures for common jobs, explains why a master electrician’s higher rate is often the cheaper outcome, and sets out what an electrical quote should say before you agree to it.
- What an Electrician Costs Right Now
- Why the Licence Tier Changes the Bill
- Service Calls, Trip Fees and Minimum Charges
- What Common Electrical Jobs Cost
- EV Charger Installation
- Electrician Rates by Region
- Why the Rate Is Higher Than What an Electrician Earns
- Permits and Inspections
- Emergency and After-Hours Work
- Why One Quote Is Higher Than Another
- What an Electrical Quote Should Spell Out
- Keeping the Cost Down Safely
- Frequently Asked Questions
What an Electrician Costs Right Now
Two of the larger US home-services cost guides publish national figures for 2026, and they broadly agree.
Angi, drawing on a survey of more than 30,000 customers, puts the average cost of hiring an electrician at about $351, with most jobs falling between $163 and $538 and hourly rates of $50 to $130. HomeGuide’s 2026 guide reports similar hourly figures broken out by licence level, and notes that most electricians apply a one to two hour minimum on any visit.
| Cost element | Published range | What it covers |
|---|---|---|
| Hourly rate | About $50–$130 per hour | Labour only; set largely by licence tier and region |
| Service call fee | About $100–$200 | Usually covers the first hour on site |
| Trip charge | About $40–$100 | Travel, where billed separately from labour time |
| Typical job, all in | About $163–$538 | Labour, parts and call-out for routine household work |
| Emergency / after hours | $100–$200 extra, or $150–$200 per hour | Nights, weekends and holidays |
| Permit, where required | About $50–$350 | Municipal fee; larger rewiring permits run higher |
| Safety inspection | About $100–$200 | Assessment of an existing installation |
These are national estimates and they shift considerably between metro areas. Use them to sanity-check a quote rather than to argue a particular company should match them.
Why the Licence Tier Changes the Bill
Electrical licensing is tiered, and each tier represents a real difference in training rather than a marketing label.
| Level | Published hourly rate | What it takes to get there |
|---|---|---|
| Apprentice | $40–$70 | Works under supervision through roughly 8,000 supervised hours |
| Journeyperson | $50–$100 | Completed the apprenticeship and passed the licensing exam |
| Master | $90–$130+ | Several thousand further hours as a journeyperson, plus a master exam |
A higher rate is not automatically the more expensive outcome. Electrical faults are largely diagnostic work, and diagnosis is where experience shows. A master who traces an intermittent circuit in forty minutes costs less than a journeyperson who spends three hours and replaces the wrong component.
Match the tier to the job instead. Swapping a light fitting rarely needs a master. Panel work, service upgrades, anything requiring a permit, and anything you cannot describe precisely usually does.
Service Calls, Trip Fees and Minimum Charges
This is where two quotes with identical hourly rates end up hundreds apart, and it is the part homeowners most often fail to ask about.
The service call fee
Commonly $100 to $200, and it usually covers the first hour on site. The question that matters is whether the fee is credited against the repair once you approve the work, or charged on top of it.
The trip charge
Some companies bill travel separately at $40 to $100, and that amount does not come off the labour time. A quote with a low hourly rate and a separate trip charge can be dearer than a higher rate with travel included.
The minimum
Most electricians apply a one to two hour minimum. A ten-minute fix is billed as an hour or two, which is why bundling several small jobs into one visit is the single easiest saving available to you.
Four questions before anyone drives out
What is the service call fee and is it credited against the work? Is travel billed separately? What is the minimum charge? And what licence level is the person attending? Ask these on the phone and most billing surprises disappear before they happen.
What Common Electrical Jobs Cost
The ranges below come from the Angi and HomeGuide 2026 cost guides. They assume straightforward access and standard fittings; older wiring, finished walls and premium fixtures push each one higher.
| Job | Published range |
|---|---|
| Replace a light switch | $50–$300 |
| Install a new outlet | $150–$350 |
| Install a ceiling fan | $140–$350 |
| Install a light fixture | $150 and up, depending heavily on the fitting |
| Recessed lighting, per can | $125–$300 |
| 240V outlet for a dryer or EV charger | $300–$800 |
| Replace a breaker box or panel | $500–$2,800 |
| Whole-house rewiring | $1,500–$10,000, or roughly $5–$17 per square foot |
| Whole-home electrical inspection | $280–$400 |
| Standby generator installation | $6,000–$11,000 |
Some of these ranges are enormous, and the spread is almost always about access and age. Running a new outlet on an unfinished basement wall is a different job from running one through a finished, insulated wall in a 1950s house. When a quote sits at the top of a range, ask which version of the job the electrician thinks they are looking at.
EV Charger Installation
This is now one of the most common reasons a household calls an electrician, and it is priced differently from the jobs above because the cost depends almost entirely on one thing: how far the charger is from the panel.
A 240-volt circuit — the same type a dryer uses — runs roughly $300 to $800 installed. A charger on the garage wall directly behind the panel sits at the bottom of that range. One at the far end of a detached garage, with conduit to run and a trench to dig, sits well above it.
The bigger variable is whether your panel has room and capacity. A 40- or 50-amp circuit added to a full or undersized panel turns a $600 job into a service upgrade costing several thousand. Ask for a load calculation before you accept any EV charger quote. An electrician who quotes the circuit without checking the panel has not finished the job of quoting.
Electrician Rates by Region
The national ranges above hide a gap of more than two to one between markets. VoltFlow’s 2026 rate analysis puts a licensed journeyperson at $55 to $65 an hour in Mississippi and $130 to $150 for the same work in San Francisco.
| Market | Typical hourly rate |
|---|---|
| Rural southern states | $55–$75 |
| National average, journeyperson | $85–$110 |
| New York, San Francisco, Honolulu | $120–$160 |
NearMeTips puts the same pattern more conservatively, at 10 to 25 percent above the national average in high-cost metros. Either way, the useful conclusion is the same: compare a quote against rates in your own market, not against a national average.
Why the Rate Is Higher Than What an Electrician Earns
The Bureau of Labor Statistics’ May 2025 release puts the median wage for electricians at $30.38 an hour, across 757,220 workers. Even the ninetieth percentile — the most experienced and best-paid tenth of the trade — earns $52.17. Yet companies bill $50 to $130 an hour.
The difference covers what an employer carries: liability insurance, workers’ compensation, the stocked van, licensing and continuing education, permit handling, office and dispatch staff, unbilled travel, and warranty call-backs. It is also why the cheapest quote deserves scrutiny rather than gratitude. A company billing close to what it would cost to employ the electrician directly has to be saving that money somewhere, and insurance is usually where.
Permits and Inspections
Electrical permits are published at roughly $50 to $350 depending on scope, with rewiring permits on older homes running considerably higher — Angi’s figures reach $200 to $900 for that category. A separate safety inspection typically costs $100 to $200.
Panel replacements, service upgrades, new circuits, rewiring and generator installation commonly need one, though the threshold is set locally. Confirm with your city or county building department rather than assuming a job is small enough to skip it.
Unpermitted electrical work is a particular problem at resale and at claim time. An insurer investigating a fire, or a buyer’s inspector reviewing a panel, will look for the permit and the sign-off. An electrician who asks you to pull the permit yourself is moving liability onto you rather than saving you a fee.
Emergency and After-Hours Work
Nights, weekends and holidays carry a premium. Published figures put after-hours rates at roughly $150 to $200 per hour, or standard rates plus $100 to $200 on the call-out. Expressed as a multiplier it is easier to check against a quote: most companies charge 1.5 times the standard rate in the evenings and 2 times on holidays, a premium of 50 to 100 percent.
The judgement worth making is which electrical problems genuinely cannot wait. A tripping breaker that resets and holds is usually a morning job. Burning smells, scorch marks around an outlet, warm faceplates, buzzing from the panel, or losing power to half the house while the neighbours still have theirs are not — those are worth the premium, and switching off the affected circuit at the panel while you wait is the sensible first step.
Why One Quote Is Higher Than Another
- Access. Finished walls, insulation, no attic or crawlspace, or a second floor with no route down all add hours before any wiring happens.
- The age of the installation. Aluminium branch wiring, knob-and-tube, ungrounded two-prong circuits and obsolete panel brands change the scope of even a small job.
- Whether the panel has capacity. A new circuit in a full panel means a subpanel or a service upgrade, which is a different project entirely.
- Whether making good is included. Some quotes cover cutting into and patching drywall; others leave you with open walls and a second trade to hire.
- Permit handling. Whether the company pulls it, and whether the fee sits inside or outside the quoted price.
- Fixture supply. Whether you are providing the fittings or they are, and what grade of device is being installed.
- Warranty. A labour warranty with a stated duration is worth paying for; a manufacturer parts warranty alone often is not.
What an Electrical Quote Should Spell Out
- Business name, address, phone and licence number, so you have a verifiable party if something goes wrong.
- The licence level of the person who will actually attend.
- A specific description of the work, with diagnosis separated from repair.
- Labour shown separately from materials, and the pricing model stated.
- Whether the service call fee is credited, and whether travel is billed separately.
- Devices and fittings by brand and grade.
- Who pulls the permit, and whether the fee is inside the price.
- Whether drywall repair and painting are included or excluded.
- Warranty terms for materials and for labour, with a duration on each.
- What happens to the price if the job grows once a wall or panel is opened.
The same principles apply across the trades, and the structure of a plumbing quote is close enough that our breakdown of what a plumber costs and how those quotes are built is worth a look if you are pricing more than one job at once. For the conversation that comes before the quote — verifying the licence, the insurance certificate and who is actually attending — see our list of questions to ask before hiring an electrician.
Keeping the Cost Down Safely
Bundle everything into one visit
With a one to two hour minimum and a service call fee on every booking, three small jobs handled together cost far less than three separate visits. Walk the house first and write the whole list down before you call.
Describe the fault properly
Which breaker trips, what was running when it tripped, whether it happens cold or after an hour, which outlets are dead. Diagnostic time is billed time, and five minutes of accurate description on the phone can remove an hour of it on site.
Clear the work area
Empty the cupboard in front of the panel and move furniture away from the outlets being worked on. An electrician on an hourly rate should not be shifting your storage boxes.
What is not worth doing is attempting the work yourself to save the labour. Electrical work carries fire and shock risk, and unpermitted or non-compliant work can affect an insurance claim. If a quote is higher than you expected, ask what would have to change in the scope to bring it down, and get a second written quote for anything substantial.
Frequently Asked Questions
Sources
- Angi — How Much Does an Electrician Cost to Hire?
- HomeGuide — How Much Does an Electrician Cost Per Hour?
- Bureau of Labor Statistics — Occupational Employment and Wage Statistics, May 2025 (SOC 47-2111, Electricians)
- VoltFlow — Electrician Rate Calculator: Hourly and Job Cost 2026
- NearMeTips — How Much Does an Electrician Cost in 2026?
- Housecall Pro — 2026 Electrician Prices (emergency multipliers)
Run an electrical business? Ypages lists businesses across all 50 states, free — and the people reading a cost guide are usually about to book someone. Add your business free.
This article is general information, not electrical or legal advice. Prices vary by market, the age of the installation and local permit rules, and the figures above are published estimates rather than quotes. Electrical work carries fire and shock risk — use a licensed electrician.
